PYE Wood Varnish

Product Description:

Clear air-drying polyurethane/alkyd resin-based formula designed to provide a tough wear-resistant finish on all internal timber surfaces in a single can. It gives a satin covering with resistance to water, wear and tear.

Ideal For:

• Can be used for parquet, paneling, doors & furniture.
• Suitable for interior particleboard, cork tiles etc

Surface Preparation:

Clean wood surface with turpentine to remove grease etc. Fill nail holes or defects with PYE Wood Filler. Sand to a smooth finish and remove dust.

Application:

Stir thoroughly before application. PYE Wood Varnish is ready-to-use product. If however, thinning is required, add 10-15% white spirit. Sand lightly between coats.

Allow 4-6 hours drying time between each coat. Minimum of 2 coats are required but 3 coats are recommended for best results. Light walking traffic is permissible after 12 hours. Drying time may vary depending on the humidity of the air.

For Brush or roller application - use direct or thin with 10% white spirit. 

For Conventional Air Spray - thin with 10-15% white spirit.

Disclaimer:  Product color may slightly vary due to photographic lighting sources or your monitor settings. GIDCI reserves the right to change or delete, supplement or otherwise amend at anytime the information, requirements and policies contained on this platform and related hereto.