Bronco Elastomeric Waterproofing Paint

Product Description:

Bronco Elastomeric Paint is a water-based elastic acrylic emulsion paint intended for interior and exterior masonry surfaces where a flexible and durable waterproof coating is required. It can bridge gaps and mask hairline cracks. It dries quickly into different surfaces with high resistance to ultra-violet rays.

Surface Preparation:

Surface should be clean, dry and free from dirt, dust, oil and grease. Remove loose paint. Use paint scraper and sand with grit 120 - 180 sandpaper.

For old masonry, remove old loose paints with steel brush or metal palette. Sand down with grit 100 to 120 sandpaper to create an even surface. Apply filler or putty on small cracks or holes. Let dry overnight. Apply 2 to 3 coats of Bronco Elastomeric Paint and allow 2 hours before re-applying paint. Low temperature will affect drying time. Allow longer drying time before re-application. Clean tools and painting materials with water.

Application:

New surfaces should be treated with concrete neutralizer to reduce alkalinity. For best result, apply 1 to 2 coats of Bronco Concrete Primer Sealer to aid in adhesion and seal concrete pores. See package instructions for application. Apply 2 to 3 coats of Bronco Elastomeric Paint.

Mixing:

Stir thoroughly using a broad flat stirrer or mixing stick.

Ideal For:

• Concrete walls
• Firewalls
• Interior and exterior walls
• Gypsum boards
• Cement boards and gutters

Coverage:

• 4 Liters - 20-25sqm (single coat) | 10-12sqm (double coat)
• 18 Liters - 80-100 sqm (single coat) | 40-50 sqm (double coat) 

Drying Time:

• Touch dry: 15-30minutes
• Hard dry : 12hours

Disclaimer:  Product color may slightly vary due to photographic lighting sources or your monitor settings. GIDCI reserves the right to change or delete, supplement or otherwise amend at anytime the information, requirements and policies contained on this platform and related hereto.