Bronco Rubberized Floor Coating

Product Description:

A rubberized coating product that is one step, self-priming for use on concrete, metal and all general surfaces. It is fast drying and has excellent resistance to water, weather, oil, acid and other chemicals. It is formatted using a modified non-chlorinated formula that is non-toxic and ozone safe.

Surface Preparation:

Preferred surface profile is semi-rough plaster finish and leveled. When concrete floor finish is smooth, mechanical grinding is recommended. Dust off with broom or best use vacuum cleaner to rid sand dust. Surface should be adequate dry, free from dirt and other contaminants prior to paint application.

Ideal For:

• For exterior and interior concrete floors like offices, schools, sports courts, Traffic Marking paint, etc.
• Can be used as finish coat over properly primed metal.

Application:

Brush, Roller or Spray

Reducer / Cleaner:

Bronco Floor Coat Reducer

% Reduction:  

• Brush / Roller: 0 - 10%
• Spray: 10 - 20%

Dry Time:

• Touch - 20 mins.
• Hard - 2 - 4 hours
• Recoat - 4 - 6 hours, minimum
• Full Cure - 3 days

Precautions:

Product must be stored at room temperature. Do not store near heat, sparks or open flame. Exposure to heat may cause bursting. Use in a well ventilated area. Avoid breathing vapors or spray must open windows and doors or use other means to insure fresh air entry during application. Should be applied during warm weather.

Use with adequate ventilation and avoid breathing its vapor. May be fatal if swallowed. If swallowed induce vomiting, contact a physician immediately. Contains no silicone.

Disclaimer:  Product color may slightly vary due to photographic lighting sources or your monitor settings. GIDCI reserves the right to change or delete, supplement or otherwise amend at anytime the information, requirements and policies contained on this platform and related hereto.