Primero Pro C200 Crystallization Waterproofing - 5Kgs

Product Description:

Primero Pro C200 Crystallization Cementitious Waterproong is a specially formulated cement mix that can continuously form micro crystals inside your concrete structure when constantly exposed to water. The micro crystals formed by Primero Pro C200 grow through small pores of your concrete structure giving it the capability to block water from entering your structure; it can withstand positive and negative water pressure up to 100 PSI while making your structure stronger than it would originally be. The crystal can grow up to 1mm thick, this repair micro crack up to 1mm thick and prevent fungus growth.

Surface Preparation:

Ensure that all the concrete surfaces are hosed down with water, as moisture must be present in the capillaries prior to the application of Pro C200 Crystallization Cementitious

Application:

Once the angle llet is dry, moisten the substrate where the Primero Pro C200 Crystallization Cementitious Waterproong will be applied. To ensure that there is sufficient bond to the concrete; application must take place shortly right after making the mixture. Make sure to apply at least 0.75mm thick of the mixture using a thick bristle brush (tampico brush). When first coat begins to dry, apply second coat in perpendicular direction. Let it dry for one day, and then make sure to dampen the surface twice a day for 8 days. During rainy season, dampening the surface twice everyday may be reduced to 5 days only.

Mixing:

Mix 5kg (2.5 parts) of Primero Pro C200 Crystallization Cementitious Waterproong C200 to 2.2 L (1 part) of water for at least 3 minutes by using a slow stirrer until the solution becomes a flowable thick consistency slurry.

Note:  Make sure to use your use apply the mixed solution within 25 minutes, after which the solution will start to thicken and lose its workability. Never add extra water to restore the consistency and workability.

Storage:

Keep dry. Keep away from direct sunlight. Avoid areas with high moisture levels.

Ideal For:

• Water Tanks
• Swimming Pools
• Retaining walls
• Concrete Slab
• Foundation & Basement
• Fishpond
• Sewage Tank
• Tunnels
• Underground shaft
• Water Treatment Structures
• Reservoirs
• Lift Pits

Coverage:

• 5kg / 6.75 sqm. Single coat / 3.4 sqm. 2 coats

Drying Time:

• Touch dry: 15-30minutes
• Hard dry : 12hours

Disclaimer:  Product color may slightly vary due to photographic lighting sources or your monitor settings. GIDCI reserves the right to change or delete, supplement or otherwise amend at anytime the information, requirements and policies contained on this platform and related hereto.